Ryan Weaver's 1969 Olds Cutlass S W31 Club Coupe

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 69 Post Sedan</div><div class="ubbcode-body">Ryan.......here's my two cents. If you don't mind modifying your tunnel......do it now cause you'll regret not doing it later and eventually, you WILL put the Ram Rod in. Ask me how I know. [img]<<GRAEMLIN_URL>>/scholar.gif[/img]

Kurt. [img]<<GRAEMLIN_URL>>/[/img] </div></div>

I am on board:-)

This has been sitting in the back of my mind for a while, and I agree to restore/repair the hump would mean never cutting it up again, so fun now Concours later:-)

I will have the piece of floor on the shelf ready to go.

Ryan

[SuperNovaSS]

Things are looking great Ryan. You will be stoked with the Ram Rod.

Jason

[Postsedan]

10-4 [img]<<GRAEMLIN_URL>>/headbang.gif[/img]

Ryan - you are good to go [img]<<GRAEMLIN_URL>>/[/img]

Dan

[Ryan1969Chevelle]

Thanks guys!!!

Ryan

[Ryan1969Chevelle]

Rushed around like a fool after work today:-)

Went to Terry's and borrowed his welder, raced back home in an ice storm to meet my friend the welder. We measured using the original frame drawing and what I had laid out was bang on using diagonal, side to side and front to back measurements:-) I wanted a second guy to go over them with me before opening up the holes for the replacement metal rings, as it is hard to get accurate measurements solo.

We ground out the bad material (about 1/4 inch around two body mount holes) and welded in two more rings, then ground with a flapper wheel and used the die grinder underneath to dress it up, looks like a million bucks:-)

I felt like a dink, I had to steal the power from the stove for the welder as the family was cooking chili for dinner:-( I guess I have heard of worse things:-)

Frame is now ready to go back form blasting:-) Monday/Tuesday.

Ryan

[Postsedan]

Unless your shipping the frame in an enclosed tralier.....you now better wait for all the snow to melt :-(

I hate snow [img]<<GRAEMLIN_URL>>/thumbsdown.gif[/img] Well done.

Dan

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Postsedan</div><div class="ubbcode-body">Unless your shipping the frame in an enclosed tralier.....you now better wait for all the snow to melt :-(

I hate snow [img]<<GRAEMLIN_URL>>/thumbsdown.gif[/img] Well done.

Dan </div></div>

I will make sure she gets to and from safe and sound and dry!!!!

Ryan

[RamblerDealer]

I think it may all melt Saturday and Sunday, so here is hoping Monday is clean sailing back to the blaster.

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RamblerDealer</div><div class="ubbcode-body">I think it may all melt Saturday and Sunday, so here is hoping Monday is clean sailing back to the blaster. </div></div>

I second that!

Our Power has been out for 8 hours so far......... Hope the melting starts soon!!

Ryan

[DW31S]

With that power outage, are we to suspect another little Weaver in 9 months??? Just jabbin' atcha Ryan!!! Keep up the good work, Bro.! And by the way, good deal on that shifter!