![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Verne,
In E/Stock, the weight break is 3260 lbs. 1968 Z28s are a natural E car and the 67 Z28 is a natural D car. Have to weigh 3105 in D. If I can get the new 67 Z28 race car to hook up like the Old Reliable, I should be able to run in the high 10.40 zone. Out in Vegas, the old car was hooking up like gang busters. Two foot wheel stands on 9" tires. Felt like the car was bolted to the ground. When you let the clutch out all you saw was the sky. 7000 rpm launches! That was an amazing race weekend for me. Got to pit with one of the all time legerdary sportsman races of our time, Ben Wenzel, both Ben and I won class. During the eliminator, 128 car field, I made it to the semi final round........4 cars and then the throw out bearing siezed up against David Rampy. The round before, I took out World Champ, Lee Zane. I was on a mission until the car broke. But as we say in the world or racing, [censored] happens. Jerry |
#2
|
||||
|
||||
![]()
tough 'break'
![]() that would've been wild to see that car win another national event eliminator almost 40 yrs later. ![]() good luck in '09 with the new car! ![]() |
#3
|
|||
|
|||
![]()
That's as close as I got at a National Event. Three times it's happened. Won two divisional races over the 14 seasons that I campaigned the car.
Anyone who races will tell you that it's not easy! You have to do it because you love it. If you win, then it's a bonus. Both of my outings to the west coast in 2002 and 2005 were fun and made many new friends out there. I was in the $$$ rounds while on tour out there both trips. Did better than I do here in Div 1! NED is tough! Jerry |
#4
|
|||
|
|||
![]()
Found these on photobucket. 1968 AHRA Bristol TN
![]() ![]() ![]() ![]() ![]() Here is a link to the rest of them. http://s48.photobucket.com/albums/f2...%20TN/?start=0 |
#5
|
|||
|
|||
![]()
Look at the Big Block Chevelle behind the Bike.......
![]() Ken
__________________
![]() The Best things in life......Aren't Things |
#6
|
||||
|
||||
![]()
[ QUOTE ]
![]() [/ QUOTE ] A little more about E.J. Potter..... A short history of E. J. Potter (or: So you thought Evel Kneivel was a wild and crazy guy!) I don't know where E. J. Potter came from, the first time I became aware of him was when he was racing/showing off his exotic motorcycle. He took a Harley Davidson frame and put a small-block chevy engine in it, sideways. This engine had Hilborn injectors and burned Nitro, and was producing about 500 Hp. It was started by having a couple guys hang on from the side, and it was pushed with a truck. When the engine fired, the assistants lifted the rear of the bike (these must have been some strong guys!) and put it up on a wooden stand that kept the rear tire, a 10" wide racing slick, off the ground. When the christmas tree said go, E. J. would rev the engine to 6000 RPM and the assistants would push him off the stand! It did a wheelie about half-way down the strip, and did about 160 MPH in the quarter mile. E. J. tried to find a small, light clutch for the thing, but he never found anything that would work. He tried helicopter clutches, but even they didn't quite do it. The rear wheel was coupled to the engine with a huge multi-width roller chain. Well, one day he reached the end of the strip and closed the throttle, and nothing happened - the throttle was stuck! He cut off the magneto, but a very hot engine (no radiator, just the thermal mass of the water in the block) burning nitro at wide open throttle doesn't need much ignition! It kept right on running. He hit the brakes (dual caliper aircraft brakes) and that slowed him to about 150 MPH, but he could feet the handle retreating under his grip. There was no fuel cutoff! As he was approaching a line of trees at the end of the strip, he took the only action he could think of, he jumped off! He slid on his rear until it burned through his chaps into his skin, and then did some somersaults. Amazingly, he ended up being able to walk after all this, and followed the new gap into the forest to see what became of his machine. All he could find was an engine block! Nothing else recognizable. Realizing that this was a bit more dangerous than he imagined, he started thinking of ways to make life safer, and while continuing with a rebuilt 327 CID bike (with, amazingly, a fuel cutoff!) he started to design his next generation machine. He got an old Dodge Dart station wagon and put an Allison 17xx CID V-12 airplane engine in the back, hooked up to something like a Borg Warner truck transmission. I don't know how he ever heard another sound after being inside a station wagon with an 1800++ horsepower engine. Anyway, there were some problems with the new machine, but it certainly was a crowd pleaser, and it did fairly good times on the clock, too. He felt that his new exhibition machine was a whole lot safer. Then, something happened. I suspect he couldn't leave well enough alone, and had to soup-up that Allison! Well, the engine blew apart one day, and he felt himself in a bit of deja-vu, sliding down a drag strip at 100+ MPH on his rear, again! This time, he was wearing Nomex, and had a racing seat still strapped to his rear, but the somersaults at the end were just as hard on the body! Well, maybe giant engines are dangerous - so he had to get the engine OUT of the car! How can you do that? Ah ha! Make the "World's Fastest Slot Car" is how! So, he put another Allison on a flatbed trailer, hooked it to a locomotive dynamo, and laid copper strips down the length of the track. He gutted an old Honda Civic (back when they were little more than tin cans, anyway) and put four rewound jet engine starter motors in the Honda. Aside from brake rotors, there wasn't much else in the car but those 4 motors, 4 wheels and tires, and a seat! Well, it WENT! I don't remember the times, but it was FAST! This thing weighed something like 800 Lbs, hardly more than the drive train on a rail. It would beat the rails off the line like they were standing still. No tire burning, just 4 racing slicks pulling the car like a rock out of a sling shot. I think the rails sometimes caught up at the far end, since the Honda wasn't really designed for 300 MPH aerodynamics. This all takes the history up to maybe 1975 or so. I haven't heard any more stories about E. J. Potter since the slot car. I wish now that I had taken the opportunity to SEE this in person. All I know about this is from reading magazines, and I'm sure it would be MUCH more memorable to have actually SEEN it! Taken from this link. http://www.crazyrider.com/historypage1.htm
__________________
...................... John Brown This isn't rocket surgery..... |
#7
|
|||
|
|||
![]()
E.J. Potter "The Michigan Madman."
![]() ![]() ![]() |
#8
|
|||
|
|||
![]()
[ QUOTE ]
Look at the Big Block Chevelle behind the Bike....... ![]() Ken [/ QUOTE ] Notice the Whizzer Gas Tank 0n the Bike..........LOL Ken ![]()
__________________
![]() The Best things in life......Aren't Things |
#9
|
||||
|
||||
![]()
Ha!..
|
![]() |
Thread Tools | |
Display Modes | |
|
|