Go Back   The Supercar Registry > General Discussion > Technical & Restoration


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 06-17-2008, 08:37 PM
StealthBird StealthBird is offline
Senior Member
 
Join Date: Oct 2000
Location: Chicago, IL
Posts: 1,127
Thanks: 1
Thanked 95 Times in 43 Posts
Default Re: Bias and radials?

It's not good to mix, but if you're going in a straight line most of the time, and you're not prone to doing exit ramps at double the speed limit, there won't be a problem.

Before drag radials came along (back in 70's and 80's), almost all vintage Musclecars were shod with modern radials. It was common to bolt slicks on and go street racing for the night, or perhaps hit the dragstrip. It was rare that all 4 tires were changed over to bias, usually just the rears.

The reason you're not supposed to mix bias and radials is because the sidewalls flex at a much different rate between the two. If you have to do a emergency maneuver, the front (radials) will dig while the back (bias) will slide. So yes, it could be dangerous. But the tire manufacturers always make it sound like if you mix bias and radials, your car will explode.

Personally, I would change all 4 in order to get predictable handling, but you can run bias/radials at the track without any problem.
__________________
1959-1980 Pontiac Window Sticker Reproductions : PontiacWindowStickers.com

DVD's for Musclecar fans! MusclecarFilms.com
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

O Garage vBulletin Plugins by Drive Thru Online, Inc.