Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#2
02-16-2008, 07:32 PM
|
||||
|
||||
Re: shifter hole
if i recall right a auto hole only needs to be trimmed on the left up to 1/4" from the screw hole on the left and the shifter factory or a hurst console shifter clears properly and the factory dust boot lands back down on the factory screw holes. if you look at the two pics you will see the 1.5" diff, no need to go crazy cutting, 10 mins with the jig saw does the job
B. 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
