![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
![]()
looks to have boxed rear bars, also the trans shot(not the best)looks to have a large yoke? maybe the m-22 is still in there under the grease.
![]() |
#22
|
|||
|
|||
![]()
I WANT TO THANK EVERY ONE FOR PROVIDING ME WITH SOME VALUABLE INFORMATION. I WOULD LIKE TO ADDRESS SOME COMMENTS.ABOUT BACKING OUT OF A AGREED DEAL IF THE CAR IS NOT WHAT THE SELLER ADVERTISES IT TO BE THEN YOU CAN BACK OUT. IF THE CAR HAS BEEN FLASELY ADVERTISED. I DO NOT CLAIM TO KNOW ALL THERE IS TO LS6 CHEVELLES I AM JUST AN AVERAGE GUY TRYING TO MAKE A WISE CHOICE, AND YES MAYBE I SHOULD HAVE ASKED THESE QUESTIONS BEFOR HAND. BUT MY WORK SCHEDUAL WOULD NOT LET GET TO THE COMPUTER. I WOULD LIKE TO KNOW IF ANY ONE CAN OFFER SOME POINTERS ON WHERE ANOTHER BUILD SHEET MAY BE LOCATED. AND IS IT POSSIABLE THAT THE AT BUILD SHEET IS FOR THAT CAR BUT WITH THE CAR VIN # NOT BEING ON IT WHAT OTHER SIGHNS SHOULD I BE LOOKING FOR IN THE BUILD SHHET TO HELP AUTHICATE IT THE CAR. I KNOW WHERE TO CHECK FOR THE VIN ON THE TRANS AND PLAN ON ASKING HIM TO WIPE AWAY THE GREASE TO LOOK FOR IT AN I KNOW WHERE TO CHECK FOR THE AXLE TUBE CODE. AND IT LOOKS LIKE IN THE CAR CURRENT STATE THAT NO ONE HAS MESSED WITH THE DASH SO I THINK IT HAS NOT BEEM APART,AND IT HAS THE RIGHT TAC PLEASE ADVISE ME ON ANY OTHER THINGS TO LOOK FOR. AND YES I WILL TRADE IT FOR A BLACK CAR IN THE SAME COND OR BETTER AND WOULD BE WILLING TO PAY MORE FOR A BETTER COND BLACK CAR. THANKS FOR YOU GUYS HELPING AND COMENTS NON HAVE BEEN TAKEN WITH DISRESPECT. I WOULD LIKE TO TALK TO THE 427 KING AS HE SEEMS TO HAVE QUITE ABIT ON KNOWLEDGE THAT COULD HELP, AND ANY TIME THAT THE SELLER AND I COULD NOT FINALAZE A DEAL I HAVE ALWAYS PAID FOR HIS RELISTING FEE.
|
#23
|
|||
|
|||
![]()
Can you turn off the CAPS LOCK? It is hard to read your posts.
__________________
Tony 55 Nomad Gasser 70 SS 427 Nova 34 Ford Sedan..Hemi powered Michigan/ Florida |
#24
|
||||
|
||||
![]()
Reflecting the third week of January 1970 at the Leeds assembly plant,this Chevelle could be anything,except an L-78.
That partial buildsheet he's showing falls in line with the time period for this Chevelle,but could be for a number of similar equipped Chevelles,including an Elcamino LS-6. Quite honestly I would've asked everything you are asking 7 days before you pushed the submit button.. If you want to conduct a buildsheet autopsy now on this Leeds assembly,try looking behind the entire backseat support cushion bunting,then the backseat bottom bun.Look at EACH hogring to spring connection,as you will most likely find something scrooled up there.Then remove the rear package tray cardboard and look between the jute.Look behind the two side ear muffs at this time too.Then remove the rear 1/4 panel trim and check behind each.If still nothing,remove each interior door panel & look behind there.Look inside each metal door & 1/4 panel pocket,as sometimes the buildsheet releases from the cardboard structure and falls in here.Remove the back of each bucketseat back as well as the bottom springs & inside the cushion covers too.If still nothing try removing the carpet and look everywhere,specifically at the metal floor around the rear center hump portion,as well as the underside of the carpet.Don't be afraid to peel up the sound deadner too. Look behind the plastic floor firewall pedal gaurd also. Look ontop of the radio & behind the back of the glovebox as they sometimes taped them there in extreme situations. If still nothing remove the two metal pillar support covers and look behind them as well as INSIDE the pillars.It could be scrolled up there and difficult to detect.If still coming up empty,try releasing the roof headliner and look up in there. The other non interior areas you can check are inside the upper rear 1/4 panel areas that are inside the trunk.Remove the Door Jamb vents near the striker,and shine a flashlight way up in there too.Don't be afraid to reach your hand in there and brush the very lower floor area. Try inside the front fenders,between the inner wheelhouse and the fender.Aim for the battery tray and voltage regulator areas behind the headlights too. You can drop the gas tank too,but this area wasn't favored heavily by Leeds,my experience has shown. I wish you success with this vehicle. |
#25
|
|||
|
|||
![]()
Is that it?
|
#26
|
|||
|
|||
![]()
Les, At this point take the car home and when you restore it youll find a sheet if its there. Not really fair to want to find a sheet in the car in order to follow thru with the purchase unless it was agreed upon with the seller. After all,if the seller found another build sheet with the vin on it today and wanted more money, you wouldnt be too happy.
|
#27
|
|||
|
|||
![]()
Well said King!!!
__________________
1970 L-78 Nova Black(sold) 1969 L-78 Clone under construction |
#28
|
|||
|
|||
![]()
I've sold a few things on ebay and I have refunded money or canceled deals mutually to keep everyone happy, but always as a mutual agreement between buyer and seller. If you go there with the intention of completing the deal (after all a deal is a deal) and you aren't happy, you may come to an agreement with the seller. Barring that, complete the deal and leave negative feedback ruining their 100% positive rating of 1. Aproach it like that and I think you will be happy.
|
![]() |
Thread Tools | |
Display Modes | |
|
|