Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
03-30-2007, 04:31 PM
|
|||
|
|||
Re: 1970 Boss 302 Block ID
The block number looks good but the number is most likely DOZE-6015-B or it could have been a DOZE-6015-C depending upon build date. Looks like he has the right block. Have him check the rear of the block were the bell housing mounts to the block. There is a flat area or flange that should have the VIN on it. Ford's stampings are not as clean as GM's and look funky so don't be alarmed if it looks like the numbers are out of alignment.
definetely post the block and vin if you can find it over at the Boss registry as Denis above has stated. www.boss302.com someone over there is always looking for a DOZE block.
__________________
<span style="color: blue">1970 GTO Judge Ram Air IV, 4 speed</span> 
|
|
#2
03-30-2007, 06:57 PM
|
||||
|
||||
|
Re: 1970 Boss 302 Block ID
I had the guy recheck the block number and it was DOZE-6015-B. He is going to check for the VIN today. He wants to get 1500.00 for all the parts he has. There are 9 connecting rods as well.I can not findwhat the rods are worth anywhere. He said they are the boss rods with a 3/8 rod bolt. Does this seems fair as there is shipping also. I went to the Boss 302 site and looks like i will have to register to post an ad. Thanks for all the help.
|
|
#3
03-31-2007, 07:55 AM
|
||||
|
||||
|
Re: 1970 Boss 302 Block ID
Thanks for the info, i posted an ad at the boss 302 registry, maybe someone there has the car for one of these blocks and all the parts i have. Thanks,George
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
