Anyone in NJ or PA with a Sun Distributor Machine?

Verne_Frantz · #1 03-22-2006, 03:28 AM

Steve,
you have a pm

**KevinW** · #2 03-22-2006, 03:58 AM

Verne, I would be interested in that as well. Had my 488 dist done by Jerry, but messed with it cause my 350 ran real bad. turned out the machine shop did not seat the valves right and I had very low vacuum. Now that that is fixed, I would like to get the dist back to where it was.

Steve, how is it going? I've been enjoying the TA thread! it is coming together. My driver is in the body shop and more metal is being replaced than I thought. Isnt it always that way

Also been keeping busy reproing the RS headlight washer soleniod stuff.

Thanks, Kevin

**njsteve** · #3 03-22-2006, 04:21 AM

Thanks for the tip Verne. Hey Kevin. I've been plodding away on the T/A. I finally found a date code correct 1112126 455 HO distributor on E-Pay (and you guys think COPO parts are hard to find!). I had an NOS 1112145 (standard 455 4 bbl application) and swapped all the internals to the 1112126 body. All the clearances were right on spec, I just want to set up the thing so the curve is right.

**njsteve** · #4 03-22-2006, 05:45 AM

Verne, I called him and looks like we're on for next week. And he's only about a half hour from me. Thanks again, Steve

**KevinW** · #5 03-22-2006, 05:57 AM

Steve, can you please pass the contact on to me? I wont be able to do the distrib until later this spring. Thanks

**njsteve** · #6 03-22-2006, 07:33 AM

Kevin I lost your email address and your profile indicates you aren't accepting pm's.

PLATINUM6BBL · #7 03-22-2006, 07:57 AM

Tom Cannon, who races the 70 Challenger T/A in F.A.S.T., has one and he takes it with him to the track.

Verne_Frantz · #8 03-22-2006, 07:58 AM

Steve,
You're welcome. I'm not trying to set my friend up in business. I'm just trying to help you because I know you're serious. As far as referring him to others, please ask him first. He's a dedicated family man with his own hobby interests.

**KevinW** · #9 03-22-2006, 06:19 PM

Steve, I turned on the PM and will send you an email shortly.

Verne, I understand your reluctance on giving your freinds info out without permission, I respect that. Steve can vouch for me

Steve, When you get you dist done, please ask him if he would be aggreeable to do mine on his machine too.

Thanks to both of you.

Enoch · #10 03-22-2006, 08:22 PM

Kevin, My engine builder in Somerville has a Dist. machine and can set it up if you have no luck with the other fellow. Let me know if you need his #.
Rich.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.