69 camaro rear license plate bracket

[Tommy_Mathison]

I know the current GM piece is different than my original... I dont have a pic though.. Thanks.

Tommy M

[KevinW]

I am working on my 2 rear 69 bumpers now. All the brackets are off. What did you want to see in the pic? I also took stainless carriage bolts and turned them down on my drill press to replicate the look if the rivets for the center bracket. They look pretty good to me, better than the repro ones!

[budnate]

I have the whole car bagged in a box, when I lay the stuff out let me look for the reg to, I thought the guys found you one??

[jl8z28]

the difference between the original bracket and the later ones ,is where it bolts on the car,the original is straight piece of metal and the later there is a gap in the metal,

[enio45]

would it be possible to get a pic of both pieces?? Sure would like to see the difference. They i can check mine!

[Tommy_Mathison]

"NOS" rear license plate bracket

Repo bracket, but correct

Tommy M.

[budnate]

ummm Tommy get on your sniper gear and hit that NOS one..looks way to cheap to me....

[Mr70]

Don't do it Tommy.
That first auction,part #344330,is for a 1975 Nova ONLY,nothing else.
It has a U-shaped swinging mounting flange,to contour the lower valiance,different from the one the 1969 camaro used.

The 1969 Camaro used part #3913608,and should have the part no. stamped into the center of the plate backing.The second auction is the design you seek,but is missing the part # stamped into it,thanks to Taiwan.

MANY Vehicles shared the 1969 Camaro License plate frame #3913608:
*1969 Camaro
*1968-71 Passenger
*1968-72 Nova
*1968-72 Chevelle
*1971-77 Vega
And Buick-Olds-Pontiacs all shared this part as well.
I still find these at local swaps for $10.00 or so,depending on their used condition.
They can be found in Junkyards here as well.

[mockingbird812]

Is that an NOS bar code too?

[budnate]

was not awake this morning...the 515 is off my car...Tommy the flapper is gonna cost ya a case of brews..if you want it.