![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#1
|
|||
|
|||
![]()
On BBC's w/flat tappets, it's *imperitive* to only break them in on the outer springs, or a set of actual break in springs...
|
#2
|
||||
|
||||
![]()
[ QUOTE ]
On BBC's w/flat tappets, it's *imperitive* to only break them in on the outer springs, or a set of actual break in springs... [/ QUOTE ] I've heard of this before..is it really that "imperative" ?? wilma ![]()
__________________
02 Berger 380hp #95 Lots of L78 Novas Join National Nostalgic Nova! 70 Orange Cooler 69 Camaro |
#3
|
|||
|
|||
![]()
Good practice...few people do it...you roll the dice on full spring pressure.
__________________
Don't mess with old farts - age and treachery will always overcome youth and skill! Bullshit and brilliance only come with age and experience. |
#4
|
|||
|
|||
![]()
The guy who is breaking in my new, stock L78 motor said "YOU MUST" use only the outer spring for break in and insists on the 25w-50 Pennzoil race oil because it has a lot of zinc in it, he was up on this a long time ago, told me about the additives being left out of most oils these days except the race oils. He also went on to say that the factory break in GM product EOS, doesn't have the additives it used to. Just one man's opinion, but 30 years experience... SULLY
__________________
70 L78 Nova Fathom Blue,Bench, 4spd, F41, 3:55 71 Porsche 911 Targa |
#5
|
|||
|
|||
![]()
Here in NASCAR country, many top notch engine builders assemble the motors in race or street condition and run them as is. No break-in required. They Highly recommend a true, 100% synthetic oil such as Amsoil, Royal Purple, etc, along with a high quality filter.
Its easy to make horsepower - can you make it last for 500 miles?
__________________
Craig S. "I saw Elvis At 1000 Feet" John Force. |
#6
|
|||
|
|||
![]()
Knock on wood, I've been running Syntec for a few years with good luck...
|
#7
|
||||
|
||||
![]()
OK so what is the recommendation for oil brand for a standard oil change on a flat tappet motor?.. not a break in, or fresh engine, but for regular usage.
__________________
Joe Barr |
#8
|
|||
|
|||
![]()
The Pennzoil 25-50 GT has NO zinc listed on its data sheet, and claims to be compliant with the current API SJ standards.
__________________
![]() |
#9
|
|||
|
|||
![]()
So what oil is good for us to use in our street motors. I have always used Castrol 10w-40. No good anymore?
![]() |
#10
|
|||
|
|||
![]()
This is supposedly a real concern on engine/cam break in...but I use Valvoline Racing all the time which has a good amount in it..GM engine oil supplement also is supposed to have plenty of zinc but don't quote me on it.
__________________
Don't mess with old farts - age and treachery will always overcome youth and skill! Bullshit and brilliance only come with age and experience. |
![]() |
Thread Tools | |
Display Modes | |
|
|