'70 Camaro Fan Shroud

[Kim_Howie]

Chuck,Enclosed pics from factory man.

[Kim_Howie]

2nd pic

[Kim_Howie]

3rd pic

[Kim_Howie]

Notice the difference in my 6 cyl. plate and a small block plate.

[Kim_Howie]

Enclosed is org picture of my car taken 1970 Notice the plate and shroud.I think they are different than the v8 plate and shrould. I have the org. plate on my car and the part # stamped in it is the same as the VO1 # 3973904 This what I am looking for. Kim P.S. my car was a 6cyl. to start with.

[Kim_Howie]

Same plate 35 years later!!!

[Kim_Howie]

org. sticker 35 years later

[Rick H]

Kim,
The 6 cylinder and non-AC cars had the smaller top panel and shroud as shown in your picture.

The Z/28, V8 cars with A/C and special order VO1 option had the 3973904 top panel and 912 and 910 two piece shroud.

Also look on your top plate next to the part number. Is there a letter before the number? My 3973904 panel off my Z has an "L" before the number.

If I get a chance tomorrow I will get pictures of both the standard panel and shroud and the VO1 option panel and shroud.


Kim after looking at your picture you need the 2 piece 912 and 910 shroud. If you are not looking for original you can get the 2 shroud pieces through GM. Approx $45.00 each piece.

Rick H.

[Kim_Howie]

Rick, pictures would be great thanks Kim

[Rick H]

Kim,
My top panel off my Z is part number 3973904. I am looking at it while I type this.

The shroud that fits it is the two piece shroud with part numbers 3973912 and 3973910. As I mentioned it is the same as Z/28 which came with VO1 when ordered.

I don't have an extra one.

Rick H.