Special Price for Broach Buster Scopes sYc Members

[Pacecarjeff]

BroachBuster.com would like to offer our special National Corvette Restores Society (NCRS) pricing to all Supercar Members.

Go to: www.broachbuster.com, On our How to Order page, click on the word "NCRS". That will take to our special offer area.

The original Broach Buster© viewing scope is a Close Up / Extra Near Focus - Monocular / Microscope

THIS IS THE INSPECTION SCOPE USED BY PROFESSIONALS!

The Broach Buster© Inspection Scope allows you to determine whether numbers or surfaces have been tampered with.
Use this to look very closely at engine block stamp pads, Trim Tags, or any parts, or casting numbers that you want to examine/verify under high magnification.

Your satisfaction is 100% Guaranteed, or your money back.

Please visit our website: www.BroachBuster.com

Lots of interesting pictures and links.

Thanks.

[Charley Lillard]

I bought one awhile back and they are awsome. You can be standing upright and as long as you can see the pad you can read it.

[Belair62]

Does it tell you if it is the acceptable fake brioach too !!!

[70 copo]

Bob,

The cataloging of the differing variations of original "real deal" vertical machining marking's are what is needed as the use of the scope is still limited to the knowlege and eyesight of the user.

Glad I can still tell an original "broach mark" with out the need of a magnifier.

If you are standardizing the observations for a team -(say Judging) this item would be the ticket if all the judges had the same prerequsite knowlege base otherwise what looks "original" to one guy is another guy's "fake".

Phil

[Mr70]

Well I could sure use one.
My old method isn't workin to good and for $100.00 PPD,it'll pay for itself.

[70 copo]

I do use an optical aid for the light marks, it is a simple folding linen tester, which is a glorified folding magnifying glass with marked graduations in inches and centimeters that I use to precicely measure the marks.

Cost me $2.50.

Hey it is your money, if the $100 dollar scope is what you want have at it...

Phil

[Belair62]

Real deal vertical broach marks are being reproduced today...are they different ? BTW...409's were NOT vertical...

[Charley Lillard]

Phil...It is alot more polite and less intrusive when you don't have to climb under somebodys hood, and maybe ask him to remove the alternator to get a good look at the pad. With this 100.00 tool you can be 3' away and get a nice view. Good luck with your precise measurements if it is buried under a alternator.

[Belair62]

You make it sound like it has x ray vision...if the alternator is there how is it gonna see thru it from 3 feet away ?

[Charley Lillard]

Look down behind the alternator. You might have to grab the heater hoses but it is easy. They really do work great.