"New" '69 Motion Camaro's

[COPO]

Here is an update:

[ QUOTE ]
Friends of Baldwin-Motion & Motion:
This week we will be releasing important technical information on the new
two-place Baldwin-Motion SuperCoupe to the media. Here's a heads-up:

The 600-plus-hp all-aluminum Merlin/Motion big-block is a brand new engine
and the first one, to be built and dyno-tuned by Bill Mitchell, will go into the
first Baldwin-Motion Camaro SuperCoupe. Before going into the car it will be
fitted with Kinsler Cross-Ram fuel injection.

The Camaro's engine layout is front/mid, with the big-block set back a full
12 inches on the tubular chassis. The front and rear chassis sections are tied
together by a tubular steel spine/backbone which runs through the console and
is welded solid to the body.

The interior layout is two-seat with a new IP assembly with MOTION-branded
instruments.

The Viper-based rear end utilizes a Dana 44 Posi centersection and custom
high-torque axles. The four-wheel independent suspension makes use of
fully-adjustable coil-over spring shocks and new Motion-branded Baer disc brakes
with
six-piston calipers and
14-inch cross-drilled rotors.

The SuperCoupe will debut and pricing announced at the SEMA Show on November
1 at the Sony exhibit.

As you can see, this is one serious Supercar!
Marty

Martyn L. Schorr
PMPR, Inc.
988 Boulevard Of The Arts, Suite 1509
Sarasota, FL 34236
941-957-0827
Fax: 941-330-9348
[email protected]

[/ QUOTE ]