1969 nos chambered exhust

[Rick H]

[ QUOTE ]
As shown in the assembly manual [NC8] the RH rear chambered muffler was welded to its tailpipe. The LH rear muffler used a conventional tail pipe secured with a U clamp. Each muffler had 2 tabs and were bolted together.

[/ QUOTE ]

There is an original GM chambered system on ebay right now that shows that very setup.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=4520947137

Rick H.

[Salvatore]

Very good Rick. Thanks for keeping us informed again. Sam

[Chevy454]

I see the headpipes and intermediate pipes are missing from that particular system...those intermediate pipes are the REAL power killers...they flatten out to clear the tranny crossmember and are as crooked as a dog's hind leg!

BTW, our system looks just like that in the last link (rear pipes bolt together etc.) but the pass. side pipe is NOT welded on...so what do we have?

[Rick H]

[ QUOTE ]
Very good Rick. Thanks for keeping us informed again. Sam

[/ QUOTE ]

No problem Sam. Hope all is well.

Rick H.