Bellhousing number and other numbers

[enio45]

I also need to check on the part numbers for the correct
pulleys for the crank and water pump and the correct # for the rad fan, fan clutch and flywheel please. Again this is for 68 camaro 396/375 HP cast head June built engine.

Thank you for the help on these.

[Kim_Howie]

Ed, If your motor had a smog pump the #s for the bottom pully are 3921923bm & top water pump pully is 3906656cv. Kim

[Kim_Howie]

The COPO nova I sold to Dennis Hartweg had the complete motor. Build date was 7A All the parts on it were mid May.

[Kurt S]

All your pulley info should be here. CRG pulley info.

[enio45]

Thank you guys for the info....this is a big help
Yes it has smog on it.....ill search for these pulleys now.

ED....

[NCGuy68]

Flywheel should be casting #3789733 (11 inch). Fan clutch is PN 3927103...not easy to find.

[JChlupsa]

Sounds like this car needs just about everything. Any pics of it, before it gets cut up and redone.
Also any chance I can get the VIN/Trim tag info off the car since its a 68?

[Kim_Howie]

Dumb question, is it nova or camaro??

[enio45]

Hi guys, thanks for the info...
Can u say COPO.....68 camaro 9737-non converted car

I bought it several weeks ago and have been doing some searching for parts quitely until the money hit the owners hands. Now that is in the past, I am looking for some parts I know is not on the car, and there may be some there correct, but my plan was to line up what i need to put the right motor together and ill sell the rest later. For me whats important is getting numbs and dates correct.

I am looking for the orig engine which it is said to be still around in PA. In case i don't ill need a 440 block, originally it was MV coded according to the protecto plate i have.

Anyhow, i apprectiate the information this site has provided and look forward to sharing any info I can.

Thanks again....ill be posting some parts wanted to help complete this project correct and appreciate your help and advise.

[Kim_Howie]

Kool Car