Motion Wheels

[olredalert]

------Not only what 1996Z15 said but the fins on the Motion wheel are curved. I have seen that Motion wheel over the years but cant quite remember the manufacturer. The wheel you have pictured looks like a western 8-inch bolt on wheel off a Collector series 82 Vette with a cone and fake spinner attached to it. Still a pretty good looking combo...............Bill S

[smooth]

I have the wheels off motion 1s maco in the shop. they have the valve stem between the fins. the center cap is packed in a box right now , but it had a label with white letters on light blue. can't remember what they were. So David there NOT the same wheels. TIM

[smooth]

I just went thru some pix . I was wrong on cap emblem. It is white circle with light blue triangle. letters i cant read from pic angle. TIM

[Dave Rifkin]

Aren't the Motion wheels Appliance Turbines?

[smooth]

That could be . the triangle might be an A. theres no casting on the outside. It may be cast on the inside. but tires are still on rims TIM

[Pantera]

Look for a name on the back of the wheel. If there is anything on the rim to show who made it; it will be on the back side of the wheel. the insides are usually fully machined and I have never seen any with anything stamped on the inside.