Dragmaster International Wheels

[55chevy]

Hey SK.. Got any Cragar S/X's laying around? They're also a Torque Thrust look alike.. 1 piece alum. wheels. Let me know

[TDW]

SK..I have the pictures of the wheels. They are 15x7, with 4'' of backspace. I told him I will take them, but I am third in line. Will let you know if I get them.
Paceme...Does it look like a 7'' would clear on your 69?

Thanks...

[Steve Shauger]

I believe they would work just fine.

[TDW]

SK...I have the wheels. The guy that had them did not measure the right way. They are 15x6, with 2 7/8 backspace. They clear the 4 piston calipers. One has some small curb rash. All have old mounting compound on them. They will need to be cleaned and painted. No lugnuts and 2 caps missing. All lug holes and cap holes are good. Do you know what the backspace is on the Atlas wheels? It looks like these will fit pretty good. Now I need to figure out some tires. Any suggestions?.Thanks...

[Steve Shauger]

I am using 215/70/15 TA's

[TDW]

Paceme...Thanks. Do you know of any other brand of caps that will fit? I tried the TTD ones, and the bolt pattern is different. Thanks.

[camarojoe]

Caps for vintage americans fit. The only caps that have an oddball bolt pattern are the caps for the new style torq thrust D's. Virtually all of the vintage 5 spoke torq thrust copies used caps with the same hole pattern for the 5 attaching screws. You can buy brand new chrome plated plastic ones on ebay for around 30.00-40.00 for a full set.