ZL-1 stamping numbers

[Kurt S]

Joe,
Who posted that and on what site?
Thanks!

[GMH454]

Thanks guys, does that mean all ZL-1s icluding the Camaros had matching block # stamped in the block and caps ? Also does anyone really know what the 107 means. Was it the 107th engine assembled ? Now that I think of it were the crate engines completed and put away or were they completed at time of sale, say 1971 or 1972. I wish I knew. Guy I bought my engine of after I bought it told me he bought it from Greenwoods workshop in Florida in about 1976. Has a burned TRW 2300
piston still in it.

[Peter]

Kurt, I'm 68SS396 from the Team Camaro website, which is where the post that JoeC is talking about originated from. I'm surprised you missed it! The link is
http://www.camaros.net/forum/Forum2/HTML/000286.html

[COPO]

I would be interested in the numbers from your ZL-1 block. Specifically, the block casting number from the rear, the block casting date and inventory number from the driver's side of the block and the assembly date coded from the front pad. I have a '69 ZL-1 block as well and would like to compare numbers to mine.

[Edited by COPO (09-27-2000 at 12:21 PM).]

[JoeC]

Kurt, his name on Team Camaro is JohnZ.
I also e-mailed him a copy of the COPO form that was in a magazine article about Kevin's COPO 427 1968 Camaro. Which is a subject still up for debate. Here is a copy of his reply.
"This is a normal COPO form, used to request production of a unit with equipment not in accordance with the released available production vehicle specifications.

What this form is requesting is to add the COPO 9737 Sports Car Conversion Package to two cars for which orders have already been submitted; the line entitled "Other RPO's....." identifies other options already ordered on the two units, which is why that line ends with "N/C", as those options have already been priced and charged on the original orders for those two cars, so there is no additional charge for them under the requested COPO.

The COPO 9737 cost $160.10, was available only on cars already ordered with the COPO 9561 427 package, and consisted of Z28 wheels and tires (E70x15 Goodyear Wide Tread GT's on 15x7 "YH" wheels, the Z28 Tire Pressure Sticker (code "DX"), and a 140 mph speedometer.

This form appears to add the 9737 package to two cars which were already ordered as 9561's, but adding the 9737 package was apparently overlooked when the original orders were submitted - this corrects the ordering error.

Best Regards,

John

[GMH454]

COPO, I will dig them out on the weekend. I keep writing them down, but I always forget where I put them. I don't think I had a date code on the engine pad. Porterfield showed me Chevy copy paperwork (now where did I put that) that showed my engine number was in the middle of a sequence of racing engines supplied in around 1971 ( I think ). Pretty sure date was not part of the numbers. Maybe that's what the 61A was.
Also were numbers like my 107 common to all ZL-1s. Whats your got?

[COPO]

Just went down in the basement, front pad is stamped TO307ML, down near the oil filter is stamped 19N620923, which is the VIN for car #51. (block came frome original owner of car #51) Caps are stamped 356, Raised casting date looks like 1 1969 then 472 under it. I have read that the 472 is an inventory number and it is directly below the casting date. These numbers are cast upside down on the passenger side of the block near the front of the engine. I'll look a bit more this weekend when I have more time to see if these ar additional markings.