yenko chevelle wheels

[Rat_Pack]

Steve, all American Torque Thrusts, T70, T70R, and 200S wheels used there own special lug nut. The diameter of the hole in the wheel was 5/8" dia. instead of the 11/16" dia. which most wheel manufacturers used and still use today. The only other company that I can remember using this diameter hole was M/T. Most people enlarge the holes to accomodate currently available lug nuts as you can no longer buy the correct ones for the original wheels. Also the depth of the shank (not counting the thickness of the washer)was 9/16" which is not made in todays market. To use current lug nuts on original American Torque Thrusts you must have them shortened by a 1/4" at a machine shop..............RatPack...................