![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
I must be doing something wrong with my R-59's.I've had two now in my Camaro.The first one lasted 7yr on a driver.I think as long as the electrolyte level is just covering the plates and your charging system is in good shape there is no reason the R-59 can't live in peace.I've always had one of those battery mats between the battery and the tray and never had anything on it.I may just have good luck,check you levels........
Steve |
#2
|
||||
|
||||
![]()
I must admit,I have never seen an R-59 pee either.I bought mine right after resto n 1994,and she is still going.Just keep the Battery Tender on it each day,check the levels each month,and drive it May-November.I had no idea they could leak so frequently.In that case I could see a market for this Topper.
|
#3
|
|||
|
|||
![]()
First repo R59 I had lasted more than 3 years in a L78 Camaro. The Restored # 30 ZL1 I had later had to be torn back apart because of a leaking R59 that even made a mess of the sub frame. When they first came out a friend sent about 5 of them back one after the other as they all leaked as soon as you filled them . All leaks were down in a corner. I think I have two now that don't leak.
__________________
...... |
#4
|
|||
|
|||
![]()
Mine cracked....not sure why.It lasted a long time before that happened.
__________________
Don't mess with old farts - age and treachery will always overcome youth and skill! Bullshit and brilliance only come with age and experience. |
#5
|
|||
|
|||
![]()
I don't want to jinx myself but all the repro
R-59s I purchased always worked as they were intended to, for me. I have some that have been in service for several years without incident. I purchased my first one in 1987 and have been buying them from the same company since. I do not know if they are all the same or if there are several mfgs. But, as insurance to all the potential problems mentioned, I will change over. The toppers do have a "cheap" injection molded look and the plastic does not have a consistant grain, but for my drivers they look fine. |
#6
|
|||
|
|||
![]()
Belair62,
Wheelstands over two feet high have been known to crack a battery case or two and maybe even a few other parts. ![]() [Edited by Stefano (12-06-2001 at 09:09 PM).] [Edited by Stefano (12-06-2001 at 09:10 PM).] |
#7
|
|||
|
|||
![]()
Could have been that pesky telephone pole.Not sure.
__________________
Don't mess with old farts - age and treachery will always overcome youth and skill! Bullshit and brilliance only come with age and experience. |
![]() |
Thread Tools | |
Display Modes | |
|
|