![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
I have never pulled a build sheet from a Yenko or COPO yet. I have found one the tank of a LA Z/28. I had a 307 car that had it, but they are rare. Best of luck though. I have seen them from a Yenko Chevelle...BKH
|
#2
|
|||
|
|||
![]()
REDZ, don't get your hopes up as this story has been going around for years. The truth is there are not any records for the Camaro or Corvette prior to 1976 to be found. According to Arthur Armstrong, former GM Legal Staff employee and Chevrolet Engineer, in 1995 he and another guy were told to search anywhere and everywhere for the Corvette and Camaro build records. They were not able to find any records other than about 2-1/2 years worth of production records for the Corvette back to 1976 and which Chevrolet already had these back to about 1978. There were not any Camaro production records or body/chassis broadcast sheets found. Arthur Armstrong wrote an article telling about this either in the Corvette Restorer or Corvette/Chevy hiperformance magazine about 3 or 4 years ago describing in further detail about this same matter. Maybe someone here has that article they can share. Most Camaro's and Chevelle's from 1970 and up have a build sheet in them somewhere, but the 69 and earlier models are not normally found.......RatPack................
|
#3
|
|||
|
|||
![]()
We've had both of our '69 Baltimore built Chevelles apart and there were no build sheets in them unless they are buried inside the seats themselves. I have copies of COPO build sheets so some existed some where in some of the cars. I have half of a build sheet that was buried in the springs of the rear seat back. It was for a Chevelle about 75 before ours. Go figure. I've posted the VIN from time to time but no one has the car I guess.
__________________
Chevelleless after 46 years......but we did find a low mileage, six speed, silver 2005 Corvette. It will just have to do for now. ![]() |
#4
|
|||
|
|||
![]()
Just pulled the chassis build sheet from the top of the tank of our LA built '69 RS Z28, build date 02C. It was over to the far driver's side and the edge could be seen by shining a flashlight from inside the left rear wheel housing. Fun stuff!
|
#5
|
|||
|
|||
![]()
The Z we are restoring was in the same place exactly...BKH
|
#6
|
|||
|
|||
![]()
thanks for the help guys. i have a 69 yenko camaro that ed cuneen authenticated, a zl1 and a 69 yenko nova i was looking for more info on. cool site. looking forward to learning more about the yenko world. anybody know where i can find a yenko chevelle.
__________________
69 JL8XRAM/,68 BM Camaro/67 BM Chevelle/W-30,67 Baldwin Motion Chevelle |
#7
|
|||
|
|||
![]()
Mc25...What # ZL1 ?
__________________
...... |
![]() |
Thread Tools | |
Display Modes | |
|
|