Aluminum or steel driveshaft ?

[markjohnson]

BTW, a Carbon Fiber driveshaft is expensive but is supposed to be worth a solid tenth. You may get to a point where the car is extremely close to breaking an ET barrier and wished you’d spent a little more money!

[Too Many Projects]

Originally Posted by markjohnson

BTW, a Carbon Fiber driveshaft is expensive but is supposed to be worth a solid tenth. You may get to a point where the car is extremely close to breaking an ET barrier and wished you’d spent a little more money!

Diff carrier is original Eaton, and no, I'm not into this seriously, just don't need to break anything else when I do play.

Breaking the tail housing off at SCR was the least expensive part to replace.

[dustinm]

Originally Posted by markjohnson

BTW, a Carbon Fiber driveshaft is expensive but is supposed to be worth a solid tenth. You may get to a point where the car is extremely close to breaking an ET barrier and wished you’d spent a little more money!

They are the strongest and have infinite shaft speed, but are not at all abrasion resistant and not recommended for street car applications for that reason.