Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#11
04-25-2023, 01:25 PM
|
|||
|
|||
Time to slip it in and see what other problems are going to come up.... My concerns are the transmission cross member.........Exhaust manifolds.....getting the engine as close as possible to the firewall yet still having enough clearance for the harness plugs for the high pressure pump......
    Wow!!!...... Transmission cross member (modified in the past for the 700R4) bolted right up to the trans mount....... Clearance with the firewall perfect.....Supplied exhaust manifolds look like they were made for this swap I know this is too perfect and I'm sure other problems will come up but we dodged many bullets till this point
__________________
 The Best things in life......Aren't Things Last edited by kwhizz; 04-25-2023 at 03:41 PM. 
|
| The Following 12 Users Say Thank You to kwhizz For This Useful Post: | ||
69M22Z (04-25-2023), Arrowsmith (04-25-2023), Big Block Bill (04-26-2023), dykstra (04-25-2023), L_e_e (04-25-2023), napa68 (04-25-2023), olredalert (04-26-2023), PeteLeathersac (04-25-2023), RPOLS3 (04-26-2023), SS427 (04-25-2023), Tenney (04-25-2023), Xplantdad (04-25-2023) | ||
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode