Harry Mann 68 L78 / L88 Camaro

[VintageMusclecar]

Tim;


Thanks for the kind words and for the opportunity to be a part of this project with you, it's sincerely appreciated.



Eric

[napa68]

The ball just keeps rolling. I got a call from Steve at AMS today and he got the original 396 apart.

Great news!!!!

Everything in the short block was brand new! Bearings, rings, bores, crank journals, etc........ Venolia 11:1 pistons @ .060. There were 2 head bolts holes that needed repair, but that is really it.

The bores were heavily greased (which was more like tar now) so that took a bit to clean out. Steve just wants to drag the monkey balls through the cylinders, clean, and reassemble. I may have mentioned, the original heads look great as well. The valves and seats will get touched up and reassembled.

Looking back, it was 1 month on the 12th of January I took everything down to AMS. While the work involved with both the 396 and the 427 was not invasive whatsoever, I still feel it's killer service.