Trunk Spatter Paint

[69 JL-8]

Where can I find some gray and white trunk spatter paint for my 67 Camaro? Thanks, Jeff

[cook_dw]

Black and aqua. No 1st gen had gray and white.

[Lynn]

https://www.yenko.net/forum/showthre...=120533&page=4

I have some of the John Berlage paint discussed in that thread. I haven't tried it yet. I believe that discussion starts on page 3.

I also bought a pressure pot set up, but it too, is still in the box.

I need to get may damn shop done!!!!

Good luck!

[Mr70]

Jeff
Reach out to John Berlage through this thread,and it's good reading as well.
https://www.yenko.net/forum/showthre...352#post753352

[Too Many Projects]

Originally Posted by Lynn

https://www.yenko.net/forum/showthre...=120533&page=4

I have some of the John Berlage paint discussed in that thread.

Lynn, I hope you have been rotating the can upside down and back upright every 3-6 months and shaking it some all these years. Left in 1 position, the solids will separate out and eventually settle and get compacted in the bottom of the can.

If so, take it to a paint store and have them shake the beejeezuz out of it for 15 minutes.