Hurst Wheel Spinner Center Cap Value

[Paul Clinton]

Originally Posted by Paul Clinton

Very rare. Have a set on my GTO since 1991. Have one rough spare. Been collecting 35+ years and seen maybe 10 sets in that time. NOS is a rare find with boxes $$$$.

Some small items: the wheels will require the small round backing plates (4) through the wheel center hole with the machine screws (2) and split washers (2) - each cap - to be mountable to the Hurst wheel. The wedge plate on the back of the spinners have been brazed to the pot metal caps. The stock method was a slot and press fit to the edge plate and pot metal eyes on the backside of the spinner.