I also got the dash carrier assembly disassembled. There was a lot of crustiness on the underside so I rigged up the pool cover siphon pump and a short hose and have it circulating the Evaporust solution via a spray tip, onto the dash frame. It all drains in to a sheet of plastic that ends at the bottom of a 7-gallon bucket. The siphon pump has to be fully submerged to work, so you want that at the bottom of the bucket inside the plastic sheet which acts as a funnel to direct all the runoff back to the bottom. I got the aquarium heater in there too. The kiddie pool is there as an emergency backup in case it all springs a leak.
|
10-30-2020, 08:11 PM
Hybrid Mode
