Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
|
|
Thread Tools | Display Modes |
|
#371
05-13-2020, 08:48 PM
|
||||
|
||||
Dave is the Tornado of Bodywork. He already has the trunk done, the driver's floor patch done, the frame rail dent repair done...and it's not even dinner time yet.
Dave, where have you been all my life? I was out in the yard pulling shrubs and trees out of the ground with my Suburban and a long chain. In the time it took me to pull three shrubs, and two half dead evergreens, Dave had all this done. Here's the dented frame rail repair: 
|
| The Following User Says Thank You to njsteve For This Useful Post: | ||
RPOLS3 (05-14-2020) | ||
|
#372
05-13-2020, 08:50 PM
|
||||
|
||||
|
And the trunk floor repair. He even saved the original sheetmetal date stamps, which are covered by the gas tank anyway.
|
| The Following User Says Thank You to njsteve For This Useful Post: | ||
RPOLS3 (05-14-2020) | ||
|
#373
05-13-2020, 08:54 PM
|
||||
|
||||
|
And the brand new reproduction elastomeric bumpers showed up via UPS from Canada. Here they are. They are really nice.
|
| The Following User Says Thank You to njsteve For This Useful Post: | ||
big gear head (05-13-2020) | ||
|
#374
05-13-2020, 09:19 PM
|
||||
|
||||
|
Thanks Tim. Steve, too many layers!
 Today I got the floor smoothed over and the trunk installed. The idea was to save as much of the original floor as possible. I also banged out some dents in the floor and fixed that jack damaged front frame rail. To do that, I cut the bottom out and using the hammer and dolly, massaged it smooth and flat. Once welded up and sanded down, I used filler to smooth over the rust pitting. The trunk was the same way. I smoothed over most of the original floor with a skim coat of filler to fill in the pits. I'm happy with it, but still some more final work to do. Tomorrow I'll get the interior primed along with the remaining trunk (I just epoxied the center of the floor) and the engine bay too.  Getting closer..... Cheers  Dave
|
| The Following 2 Users Say Thank You to A12pilot For This Useful Post: | ||
big gear head (05-13-2020), RPOLS3 (05-14-2020) | ||
|
#375
05-13-2020, 09:22 PM
|
||||
|
||||
|
Trunk work! Still final blending to do on some areas, but happy with the results so far!
 Cheers Dave
|
| The Following 5 Users Say Thank You to A12pilot For This Useful Post: | ||
big gear head (05-13-2020), markinnaples (05-14-2020), PeteLeathersac (05-14-2020), RPOLS3 (05-14-2020), Xplantdad (05-14-2020) | ||
|
#377
05-13-2020, 09:26 PM
|
||||
|
||||
|
Thanks Tim. Means a lot that you guys appreciate it. Is Steve paying me for all this extra detail? Of course not! That's just the kind of guy I am...... stupid!
 More tomorrow! Cheers Dave
|
| The Following 2 Users Say Thank You to A12pilot For This Useful Post: | ||
MosportGreen66 (05-16-2020), Xplantdad (05-14-2020) | ||
|
#379
05-13-2020, 09:33 PM
|
||||
|
||||
|
But think of the exposure you're getting!
From now on everyone is gonna want to buy a car that was half done by you! But seriously you are doing an amazing job at an incredible pace. I guess I'll have to start sending you money now, not just parts.
|
|
#380
05-13-2020, 09:34 PM
|
||||
|
||||
|
Quote:
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
