![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#1
|
||||
|
||||
![]()
So I looked at Judski's yellow car's tank sticker (thanks rsinor) and it is way different than the Maher car. As the yellow car is the gold standard and is a known ZL1 since the late 1970s
(Vette Vues Magazine in March 1980), the tank sticker has L88 as the listed RPO FIRST, then down near the bottom is ZL1 ALUMINUM CYLINDER BLOCK. Which is what I found weird about the orange car's sticker: no mention of L88. It should be there as the ZL1 block is simply a substitution INTO the L88 package on a Corvette, replacing the L88s iron block. My 2 cents, and THIS IS JUST LITTLE OLD ME EXPRESSING AN OPINION, not disparaging the car or John Maher (unless he paid for fake docs then that's fraud), but even if I had the money to have Kevin McKay restore a Corvette for me - and that must be astronomical $$ - it would NOT be the Maher car. There's just owner oral history there, and that's not enough. I don't trust the docs on the Orange car, now, as far as I could throw them. Vette Vues March 1980 picture of tank sticker for yellow ZL1 Coupe, compare to Maher car tank sticker I posted earlier.
__________________
I ain't nobody, dork. Last edited by Tracker1; 12-30-2018 at 04:00 PM. |
#2
|
|||
|
|||
![]()
got a question for the guys who know, why do I see some of the "L88" (put in quotation marks as probably more are fakes than real ones) have the emblem at the rear of the hood scoop instead of the front of it? which is correct? did all the originals say 427 or did any come with L88 call out?
|
#3
|
|||
|
|||
![]() Quote:
__________________
Corvette nut since I was a kid. 67 435s and L88s are my favorites |
#4
|
|||
|
|||
![]()
----Only L88 emblems from GM are decal style. As far as I know, and I bought a 1969 3000 mile original L88 Monaco orange convert from the original owner, there were no actual L88 callouts anywhere but on the console. New owners to the L88 family really want to announce their arrival. I guess the hood alone isn't enough for those guys. The 427 emblem is correct as SBR has stated.
----As usual with all of us, I really wish I wouldn't have sold it!!!......Bill S |
#5
|
|||
|
|||
![]()
and it should be at the front correct??
|
#6
|
|||
|
|||
![]()
----Yup! If its a factory hood the holes should be there......Bill S
|
![]() |
Thread Tools | |
Display Modes | |
|
|