Ryan Weaver's 1969 Olds Cutlass S W31 Club Coupe - Page 259

**Ryan1969Chevelle** · #**2581** 03-18-2018, 02:27 PM

Quote:

Originally Posted by earntaz

Ryan -- here is San Antonio, I found Boeshield at the local Bass Pro Shop ... Craig

Thanks!!!

I have heard it is at a local craft store.. Northernforce.....

Ryan

**Ryan1969Chevelle** · #**2582** 03-19-2018, 01:30 AM

Did some W31 running around today.

Reorganized the igloo and brought home 2 SS11’s, 2 tires, 5 14 X 6 steel wheels (I finally created a full set!!!)

I brought home my M20, my original bellhousing. (I want to assemble the car as close to original as possible. (I have so many parts to hop it up after)

I raced to a local store to get Boeshield, I am going to coat anything not painted in that stuff. A year of sitting in the igloo has shown me the non painted parts would end up looking like crap unless I protect them. Lines, clips, bolts, nuts, etc are getting Boeshielded :-)

Ryan

**Ryan1969Chevelle** · #**2583** 03-19-2018, 01:34 AM

Thanks Northernforce :-)

Lee Valley Tools:-)

Ryan

**Northernforce** · #**2584** 03-19-2018, 11:32 PM

How many cans did you buy?I love this thread-car is better in person(as well as the owner!!!)
Keep on Cruising!!!
Dave

**Ryan1969Chevelle** · #**2585** 03-21-2018, 09:22 PM

Quote:

Originally Posted by Northernforce

How many cans did you buy?I love this thread-car is better in person(as well as the owner!!!)
Keep on Cruising!!!
Dave

This stuff is 30 bucks a can.... I bought ONE!

Thanks Dave :-)

Plan to visit, when the metal work and paint starts. Check it out.

Ryan

**Ryan1969Chevelle** · #**2586** 03-21-2018, 09:23 PM

I dropped off the rims, and jack parts.

They will paint the rims dove grey all over then paint the faces Glade green when they touch up the body.

Ryan

**orig69ss** · #**2587** 03-27-2018, 02:20 PM

Don,t mean to hi jack this but your car has birthday today 3/27/69 great for you and you know the original owners too, keep up the good work Ryan looking good.

Chuck

**Ryan1969Chevelle** · #**2588** 03-27-2018, 02:49 PM

Quote:

Originally Posted by orig69ss

Don,t mean to hi jack this but your car has birthday today 3/27/69 great for you and you know the original owners too, keep up the good work Ryan looking good.

Chuck

How can something perfectly related be hi-jack? Thanks Chuck!!!

I would have missed it totally!!

Happy "Green 325HP, 4 speed, GM, A-Body" Birthday:-)

Ryan W.

**Ryan1969Chevelle** · #**2589** 03-27-2018, 02:59 PM

My next critical step is to make the chassis a roller to pick up the body.

I thought I had a wheel cylinder issue but was incorrect. I remembered the WS's didn't want to fit between the raised surfaces on the backing plates but measured it all up and no issue.

Ryan

**Ryan1969Chevelle** · #**2590** 03-27-2018, 03:05 PM

Brake bits.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.