Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
11-12-2017, 01:17 AM
|
||||
|
||||
I am almost done installing one in a 68. Requires no floor or console mods if you modify the shifter and shifter mount. The cross member mod is not difficult and requires a Turbo 400 cross member as raw material. All in all pretty straightforward if you can weld and know someone with a mill.
|
| The Following User Says Thank You to scuncio For This Useful Post: | ||
jerry455 (11-12-2017) | ||
|
#2
11-13-2017, 04:06 PM
|
|||
|
|||
|
Doug Nash designed the 5-speed to be used with 3.08 gears on the street...
If you go to this web site www.pozziracing.com they go over the shifter and cross member modifications... I have a blue print from another site for a 1st gen. Camaro shifter mount also... Hope this helps... Crash
|
Hybrid Mode
