Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#10
09-08-2017, 11:37 PM
|
||||
|
||||
No TCS..
You want manifold vacuum to the distributor....just tee into the line by the choke pull off and you will get full vacuum. The factory had these set at 4* btdc...if you have good fuel this can be kicked up. I run a total of 36* all in by 3,000 rpm. You can play around with the initial and then adjust the mechanical weights to get you to the right spot. A dial back lite is handy for this.
**TCS can be installed just for looks and made inop...these motors like a little lead on the crank, especially if you have the other aspects dialed in...carb, fuel, gears, plugs, etc.
__________________
02 Berger 380hp #95 Lots of L78 Novas Join National Nostalgic Nova! 70 Orange Cooler 69 Camaro 
|
| The Following User Says Thank You to WILMASBOYL78 For This Useful Post: | ||
Diamond_Don (09-09-2017) | ||
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode