1969 Camaro console 8 track picture needed

[Edgemontvillage]

Originally Posted by Steve Shauger

Here's a picture from a survivor car. There were 4 rubber bumpers (you can see one on lower right), which were installed to minimized vibration of the 8 track assembly.

It appears also the fasteners used to attach the console door to the hinge on the survivor are small 6 point bolts rather than the standard phosphated pan head Phillips screws.

[Steve Shauger]

Originally Posted by Edgemontvillage

It appears also the fasteners used to attach the console door to the hinge on the survivor are small 6 point bolts rather than the standard phosphated pan head Phillips screws.

Yes interesting it's a very early 69 9B Nor car, and I've only seen that on two other rather early cars. Its my favorite car lemans blue with blue deluxe rs/ss L34, m21, 373 with 24K miles. Untouched except exhaust system. Orig owner changed the chamber to transverse system because of noise. When I purchased from him in late nineties I noticed it had the chamber hangers still on the car and questioned the orig owner.