Re: New Yenko Owner needing some help!
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">The block casting appears to be casting # 3970010 and there is an additional entry in some of the records referring to 010-V0414-CRE. </div></div>
I believe CTB or CTC would have been the correct engine stamp suffixes for the 70 Yenko Deuce. CRE would be correct for an L48 350ci/300hp. CTC, CTB and CRE would share the same casting number 3970010. the Also check the casting date on the bell housing flange just below the distributor, since CRE may have been used on other applications/years. the "V0414" portion would equate to an engine assembled April 14th at the Flint plant.
__________________
Steve Nuwer
1970 Z28, Norwood 03A, 48 48, 723 Int, M20, COO, 2021 Legends Platinum restored
1970 L78, Norwood 04C, 17 17, 711 Int, M21, COO, born-with drivetrain project.
1972 Z28, Norwood 11C project, born-with drivetrain, 26 26, 775, M20, CGG project
1970 Z28, Norwood 05C, 48 G, 720 Int, M21, COZ, Original Unrestored (SOLD)
www.2ndGenZ.com
|
06-29-2016, 09:16 PM
Hybrid Mode
