Re: Yukon positraction for GM 10-bolt ?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: COPO_Anders</div><div class="ubbcode-body">
Thanks Paul,
even though it probably could be used in a early 10-bolt axle, I guess the best (strongest) thing would be to use a 8.5 housing and 12-bolt 30 spline axles. Right ?</div></div>
Thats what I did on the 10 bolt 8.5 in my 71 Nova. Used a truck 8.6 w/3:42 gear, 12 bolt 30 spline axles and installed the correct bearings to make it work ... TAZ
__________________
You've never lived until you've almost died -- for those who fight for it, life has a flavor the protected will never know!
|
03-29-2016, 10:43 PM
Hybrid Mode
