69 Camaro OE front seat belts w/ shoulder harness

[HawkX66]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Kurt S</div><div class="ubbcode-body">Belts are independent of standard / deluxe interior.
http://www.camaros.org/seatbelt.shtml </div></div>
I'm actually looking for buckles, not belts. Sorry about that...

[m22mike]

Hawk
After your last post I am not sure what you looking for [img]<<GRAEMLIN_URL>>/dunno.gif[/img] if it is mounting these might help. FYI, all the correct model #'s are in a chart at CRG that Kurt posted the link to.
The front retractor and 1 seat belt is tagged model 2904 (2 pieces), the shoulder harness is model 2950 (2 pieces) along with the belt that goes on the tunnel with 2904. both are the same length, and when mounted together both lables face out.
All the rear belts are model 2910
The photos are from a 17K mi. car that was not messed with.

Rear

[HawkX66]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: m22mike</div><div class="ubbcode-body">Hawk
After your last post I am not sure what you looking for [img]<<GRAEMLIN_URL>>/dunno.gif[/img] if it is mounting these might help. FYI, all the correct model #'s are in a chart at CRG that Kurt posted the link to.
The front retractor and 1 seat belt is tagged model 2904 (2 pieces), the shoulder harness is model 2950 (2 pieces) along with the belt that goes on the tunnel with 2904. both are the same length, and when mounted together both lables face out.
All the rear belts are model 2910
The photos are from a 17K mi. car that was not messed with. </div></div>
There we go. Thanks Mike. It was pictures two and three that I was looking for. Also, you cleared up another part that was confusing me. Both belts and buckles have one part number. I figured there would be a separate one for each. Any chance you have a better pic of the plastic cover in pic two?

[m22mike]

I do not, there are two types of covers, one has a snap, the other does not . I will see if I can get a picture for you tomorrow.
The belt model # is a assembly, and includes a buckle and the clasp. [img]<<GRAEMLIN_URL>>/scholar.gif[/img]