undercarriage semi gloss black

[jasonL78]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: YENKO DEUCE REGISTRY</div><div class="ubbcode-body">I agree with Jason's approach with the only difference being that I used PPG's Deltron line - just personal preference.

I sprayed:
- DMC902 - Concept Carbon Black
- DCX61 - hardner
- SU4985 - matting agent

Like Jason said, spray it out first to make sure you like the gloss level - I didn't and also like Jason would have preferred a little less gloss with our finished product, but I'm hoping the gloss will tone down over time...



</div></div>


Omni is the inexpensive way out. I had to put down 4 coats of paint for it to cover. Marlin most likely used 2 concept is a lot more expensive.

I have also used sem rust shield on various projects.