Copo Camaro Radiator

[RS_COPO_Canuck]

Ok - Great - Thank you Charley

[Stefano]

Agree with the Pope on comments above.

Curved Neck looks fine to me. Seal it up and let it soak in tub of "Evapo Rust".

[camaromb]

It looks like the radiator was built from some of the reproduction components Heartbeat sells. The brackets are not like the originals I have, slight differences from original. Most originals are very crust/pitted so repro is probably the best option. Also, the filler neck overflow is angled about 90 degrees from what I have seen on original radiators. How does the I O tank look? Not hard to create a curve neck radiator from a standard 4 core by making the I O tank and adding the curve neck.

I have 3 originals radiators I am working on now, I can send you pictures if you need any. I have A B and C dated to compare to.

[RS_COPO_Canuck]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: camaromb</div><div class="ubbcode-body">It looks like the radiator was built from some of the reproduction components Heartbeat sells. The brackets are not like the originals I have, slight differences from original. Most originals are very crust/pitted so repro is probably the best option. Also, the filler neck overflow is angled about 90 degrees from what I have seen on original radiators. How does the I O tank look? Not hard to create a curve neck radiator from a standard 4 core by making the I O tank and adding the curve neck.

I have 3 originals radiators I am working on now, I can send you pictures if you need any. I have A B and C dated to compare to.

</div></div>

Thanks - would love to see some pics.....especially the filler neck area - it's coming apart anyway - so it needs to be done correctly.

[RS_COPO_Canuck]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Stefano</div><div class="ubbcode-body">Agree with the Pope on comments above.

Curved Neck looks fine to me. Seal it up and let it soak in tub of &quot;Evapo Rust&quot;. </div></div>

Stefano - I'll spray bomb it as is and sell you the car? [img]<<GRAEMLIN_URL>>/smile.gif[/img]

[Stefano]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RS_COPO_Canuck</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Stefano</div><div class="ubbcode-body">Agree with the Pope on comments above.

Curved Neck looks fine to me. Seal it up and let it soak in tub of &quot;Evapo Rust&quot;. </div></div>

Stefano - I'll spray bomb it as is and sell you the car? [img]<<GRAEMLIN_URL>>/smile.gif[/img] </div></div>

I'm a buyer even with that Rad [img]<<GRAEMLIN_URL>>/wink.gif[/img]