Did Bill Thomas build Camaros outside NICKEY??

[Day2_69Z]

I noticed the None vacuum line on the distributor, can you post the stamped # and date ?
Also, the dates on the carbs with list #'s etc.?

Damn cool ass car !

[beater68427]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Day2_69Z</div><div class="ubbcode-body">I noticed the None vacuum line on the distributor, can you post the stamped # and date ?
Also, the dates on the carbs with list #'s etc.?

Damn cool ass car ! </div></div>

Thanks!! The engine in the car now is nothing special a 454 with 67 427 closed chamber heads steel crank flat top pistons comp cams 305H, I have the 074 heads dated 73 and the Offy intake is dated 73 most everything form the other engine was dated 73 the block was junk so I scraped it, some day I was going to build a 73 set up to duplicate it but for now what's in it stays.

[JRC99]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: beater68427</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Day2_69Z</div><div class="ubbcode-body">I noticed the None vacuum line on the distributor, can you post the stamped # and date ?
Also, the dates on the carbs with list #'s etc.?

Damn cool ass car ! </div></div>

Thanks!! The engine in the car now is nothing special a 454 with 67 427 closed chamber heads steel crank flat top pistons comp cams 305H, I have the 074 heads dated 73 and the Offy intake is dated 73 most everything form the other engine was dated 73 the block was junk so I scraped it, some day I was going to build a 73 set up to duplicate it but for now what's in it stays. </div></div>
I gotta hear this. VERY similar to my grandfather's setup, except I don't know the heads and the pistons are domed. I'm assuming it's the .575 lift?

EDIT: I see you posted a video.