Clutch Chatter

[earntaz]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SS427</div><div class="ubbcode-body">An easy way to get the bushing out, insert grease behind the bushing and a little around an old input shaft on the bearing surface if you have one. Insert the shaft all the way in and using a rubber mallet, hit it a few times and the hydraulics will push the bushing right out. Works great.</div></div>

In GM tech school, there were all sorts of pullers, etc. for various tasks -- we were also instructed on this little trick. With that being said, I have NEVER used a puller on many engines -- pack the cavity with grease, tap on an old input shaft and hydraulic the bushing out.