Clutch Chatter

[Bill Pritchard]

Yes, the bearing spins and pivots freely mounted as shown in that last picture. I will be ordering a whole new clutch kit (probably a Hays since that seems to be Dan's favorite [img]<<GRAEMLIN_URL>>/grin.gif[/img] ) and hopefully that will have an all metal bearing. I have anti-seize for the input shaft bearing snout. Thankfully both the starter wiring harness clip and the speedo cable clip were properly mounted directly under their respective bolt heads.

Thanks again, gents [img]<<GRAEMLIN_URL>>/worship.gif[/img]