Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
02-27-2015, 01:57 AM
|
|||
|
|||
Re: Clutch Chatter
Bill -- The two clips on each side should be in the groove of the throwout bearing ... not behind it. Also, make sure the disc, PP and flywheel are absolutely free of any contamination -- especially oil and dirt off your hands.
__________________
You've never lived until you've almost died -- for those who fight for it, life has a flavor the protected will never know! 
|
|
#2
02-27-2015, 03:17 AM
|
|||
|
|||
|
Re: Clutch Chatter
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: earntaz</div><div class="ubbcode-body">Bill -- The two clips on each side should be in the groove of the throwout bearing ... not behind it. Also, make sure the disc, PP and flywheel are absolutely free of any contamination -- especially oil and dirt off your hands. </div></div>
Exactly. The bearing is installed incorrectly on the fork. Verne [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
