Ryan Weaver's 1969 Olds Cutlass S W31 Club Coupe

[Ryan1969Chevelle]

Copy that Dave.

When I have all these items in th same place at the same time I will confirm. (Not going to cut the original console top plate)

Ryan

PS: Please take Good care of your back!!

PPS: Please ask around for a garbage base for me, or two!!!

[DW31S]

I hate to break your heart, but imagining is all you're gonna be doing to get a Ram Rod or a real Super Shifter to work with your console without some heavy modifications.

[DW31S]

Call Tweed, he had one.

[Ryan1969Chevelle]

Tweed will keep an eye out:-)

Thanks

Ryan

[Ryan1969Chevelle]

Progress:-)

I got a water hose set up in case of Fire, and removed all solvents and flammables and cleaned up in the garage to be safe.

I repaired the small rust spots on the bottom edge of the passenger side wheel well.

I sprayed everything with Zinc weld through primer and mig welded the pieces in and then drilled holes where spot welds used to be and welded small rosettes to mimic spot welds. This area will be undercoated so some of this will be hidden.

Today was fun, even Terry "RamblerDealer" dropped by with an SRT10 Jeep for Mrs RamblerDealer:-) we had a nice visit, we agreed the only way to eat this elephant is one bite at a time.

Ryan

[Ryan1969Chevelle]

Pictures

[Ryan1969Chevelle]

Pictures

[cook_dw]

[Postsedan]

Dan

[Ryan1969Chevelle]

I had a nice visit with Tracker1 (Des) and his brother up from NL:-)

We took a trip to the igloo to get parts I have gathered locally. We had a nice chat otw to and from:-)

Des even dropped off an Olds flywheel, a little gift!!

Ryan

PS: Hope to weld away the morning tomorrow.