Media Blasting 101

[Damien]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SuperNovaSS</div><div class="ubbcode-body">Damien,


I'll have to check the numbers on What I have. I have only tried 2 types. One was very fine and worked well but caused a lot of dust. I just ordered a new batch that is more coarse. It works well but seems to leave a more rough finish. Who would have thought?

You may be best to call one of the blasting supply places and get their opinion since they deal with it all the time and you will have to buy the stuff somewhere. I also used a media mix called Starblast that worked pretty well for the type of parts you are asking about.


Jason </div></div>

I have found 3 grades, fine, medium and coarse so I am going to try medium with a little lower pressure and see how it goes. Thanks again.