Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
11-29-2013, 02:24 AM
|
||||
|
||||
Re: LS-6 camshaft
I have a Federal Mogul 143 version. The price was right, but I have not installed it yet. Should I get the Crane? 375hp engine in 69 Camaro , M20,3.31 rear. Hoping for mid to low 12's. What do you think?
__________________
 69 SS/RS 396 M20 X22 Nor 12B,72B,712 bought 1979 FULL OWNER HISTORY 69 Dick Harrell tribute Day II 427 M20 4.10 X11 76 orig pnt, 711 67 Super Stock 302 Camaro re-creation 
|
|
#2
11-29-2013, 02:28 PM
|
||||
|
||||
|
Re: LS-6 camshaft
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bbbentley</div><div class="ubbcode-body">I have a Federal Mogul 143 version. The price was right, but I have not installed it yet. Should I get the Crane? 375hp engine in 69 Camaro , M20,3.31 rear. Hoping for mid to low 12's. What do you think? </div></div>
I'm sure the "1320 boys" will chime in on this...seems to me you would need a little more gear to get there...but, maybe with headers, good tune and traction it might work. The M20 will help the low end torque...wilma
__________________
02 Berger 380hp #95 Lots of L78 Novas Join National Nostalgic Nova! 70 Orange Cooler 69 Camaro
|
|
#3
11-29-2013, 10:04 PM
|
|||
|
|||
|
Re: LS-6 camshaft
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bbbentley</div><div class="ubbcode-body">I have a Federal Mogul 143 version. The price was right, but I have not installed it yet. Should I get the Crane? 375hp engine in 69 Camaro , M20,3.31 rear. Hoping for mid to low 12's. What do you think? </div></div>
depends what you have for tires and exhaust.. if its a 10:1 bone Stock engine, with small tires and manifolds.. i would bet you will make 13:40's with 3:31 gears... IMO... Its hard to say!! we need more info on what you have for a set up. 3:31 is not a 1320ft friendly gear..
__________________
Pete Simpson 1962-2013 RIP Owen Simpson Eric Simpson
|
|
#4
12-02-2013, 11:51 AM
|
|||
|
|||
|
Re: LS-6 camshaft
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: COPO PETE</div><div class="ubbcode-body">[quote=bbbentley]I have a Federal Mogul 143 version. The price was right, but I have not installed it yet. Should I get the Crane? 375hp engine in 69 Camaro , M20,3.31 rear. Hoping for mid to low 12's. What do you think? </div></div>
depends what you have for tires and exhaust.. if its a 10:1 bone Stock engine, with small tires and manifolds.. i would bet you will make 13:40's with 3:31 gears... IMO... Thats what i meant by "bone stock" usually a slapped together big block only came in at 10:1 or so from factory. 100% agreed still. Lucky to get out of the mid 13's if this is the case.
__________________
Pete Simpson 1962-2013 RIP Owen Simpson Eric Simpson
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
