Next Years Power Tour Car Part 2

[kwhizz]

A lot of little stuff happening......Got the Console, Shifter, and all the Electrical hooked up, checked out and installed for the last time......We also got the Dakota Digital oil pressure sending unit installed ...the next issue was with the Vintage Air system........I have to feed the A/C hoses thru the kick panel and out thru the firewall mounted seal off plate.......the fire wall plate needs to be off to feed everything thru........and I needed to get the hose's figured out and get the fittings crimped on .......then I can remove the unit inside the car and hook them up and install the unit for good (Hopefully).........I installed the inner fender wells to get the hose routing all figured out and measured...........I'll go to see Donnie at Frame-up tomorrow and get the hoses finished up and installed..........Then I painted the Core support and the inner wells...........and.......I found out that the stock ZL1 exhaust manifolds aren't going to fit.........So......I ordered some Flowmaster Headers that are supposed to fit............(we'll see)........Also while at SEMA I talked to the Maradyne Fan people about my concerns about having the Radiator, A/C Condensor, and Intercooler all stacked together......he showed me a dual fan set-up with shroud that moves over 3000 CFM......That should be coming in this week also.....Whoosh!!........