![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Without seeing the floor or trunk area it's hard to make an acessment of what it needs. My 2 cent advise though is if you're doing a full floor replacement it should be sitting on the frame with the frame mts in the correct location. Without that, you won't know if the pan is going to line up with the frame for sure. I think you'll want to put the bolts in as you go and pull them to torque specs too as on an A body, that can effect your gaps.
The AMK full floor is very nice, but correct placement in relation to the frame mts is a must. JMHO |
#2
|
|||
|
|||
![]()
Ask and you shall receive:
Whole Floor ![]() Rear Floor ![]() Passenger Floor ![]() Driver Floor ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|