Body mount bolts and washers

[Lynn]

My originals are right at .125" or 1/8" thick.
The replacements I got with the poly bushings are barely thinner at .118".

I also have some from a 70 Nova, and they are just barely thicker than my originals from the 69 Camaro. They too are pitted.

I can live with the difference, but the replacments appear to be simple hardware grade, and they distort too easily.

Would like a good grade 8 washer. 5/8 hole, about 2 and 7/16 outside diameter and close to 3/16 inch thick.