Nice Misc Parts

[luv2sixty9]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: camaro cat</div><div class="ubbcode-body">69 RS washer bottle plastic screw caps. How many,3 or 6? Nice shape? Also, rear spring shackle plates, nice?

Thank you

Loren </div></div>

(3)Three Screw Caps. Both parts are in nice shape like header indicates. Can send pics if you like Thanxs Dave

[camaro cat]

Not sure if they are different but there are 3 caps on the screws that hold the bottle bracket to the bracket that is screwed to the inner fender and then 3 on the screws that come up thru the inner fender into that bracket. If they are different do you know which of the 3 they are? Do the shackles include the bolts &amp; nuts?

Thank you

Loren

[luv2sixty9]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: camaro cat</div><div class="ubbcode-body">Not sure if they are different but there are 3 caps on the screws that hold the bottle bracket to the bracket that is screwed to the inner fender and then 3 on the screws that come up thru the inner fender into that bracket. If they are different do you know which of the 3 they are? Do the shackles include the bolts &amp; nuts?

Thank you

Loren </div></div>

The caps are for the washer bottle and not for the screws the come up through the inner fender. Those even though listed in the assembly manaul I have not seen ever in my 30 years of messing around with camaros. I have had several unmolested RS Camaros and they never had those little ones. The shackles do not include the bolts and nuts, just the 4 plates or shackles. Thanxs

[camaro cat]

OK, I had to think real hard about it. Spending $100 for 3 small plastic caps seems crazy but this is the only set I have ever come upon. If they where assembly line installed, and you might send me a picture first,I'll go ahead. Let me know what I need to do. On the shackles,I really need the bolts &amp; nuts the most.

Thank you

Loren

[Salvatore]

I will take the bell housing inspection cover Dave. Also, I do not have to think hard about the RS caps. I will take those if the other deal falls thru. Thanks, Sam (215)723-1600.

[luv2sixty9]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: [email protected]</div><div class="ubbcode-body">I will take the bell housing inspection cover Dave. Also, I do not have to think hard about the RS caps. I will take those if the other deal falls thru. Thanks, Sam (215)723-1600. </div></div>

Sam,
I located another set of RS Caps if your interested. If not I have them sold to another member. Dave

[camaro cat]

What happened here? I said I would take them and left a pm but never heard back. Can I assume the screw caps are gone?

Loren

[luv2sixty9]

So how do you want to proceed? I have not received a pm from you at all. I did receive two from Sam reference the caps, but did hold them for you as I advised Sam your were first. Send me a pm or call me 484-573-1371.

[camaro cat]

OK, I do not know what I am doing wrong. I have sent 2 pms' and tried your phone number numerous times but keep getting told it is a number not in service. I have no other way to make contact.

Loren