The New Project: Part Deux!

[njsteve]

Here's some updated photos on the frame rail repair and trial fitting of the replacement outer section on the passenger front of the rear rail.

[njsteve]

Hey, MCACN has my car featured in their email today:

http://www.mcacn.com/71712.htm

[77Z28]

Steve, your recount of the entire car title fiasco is just incredible! What a relief this must be.

Todd

[njsteve]

Frame progress.

Front replacement section held in place for trial fit prior to welding:



Sway bar hanger removed. Showing the burned through spots from unsuccessful attempts at stick welding the broken mounts back in the 1970s.

[njsteve]

The bad section of rear rail getting trimmed for removal. The trunk floor was actually rather nice above the rail.







Inner brace being fitted in place:

[njsteve]

The replacement section trimmed and fitted:

[njsteve]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 77Z28</div><div class="ubbcode-body">Steve, your recount of the entire car title fiasco is just incredible! What a relief this must be.

Todd </div></div>

Sort of. Now that I have the title and plates to drive it, it's sitting on jack stands getting the frame done. [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img]

It's a conspiracy I tell ya!

[napa68]

Any updates Steve?

[njsteve]

I have been collecting a bunch of parts since the car IS STILL getting the frame rail repairs done. [img]<<GRAEMLIN_URL>>/mad.gif[/img]

I have the Gardner exhaust system, new fuel tank, front coil and rear leaf springs, shocks, etc., waiting to go in. I cleaned the original fuel and brake lines.

I did recently speak with a guy out in British Columbia who remembers the car when it came to the area in the mid-1980's. He has photos of the car from that time and is trying to get them scanned and sent to me. He was friends with the mechanic who was doing all the work on the car at the time. He witnessed a lot of the original parts getting tossed in favor of brand new &quot;correct&quot; stuff from the Classic Industries catalog UGH! [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img]

The original rear leafs and front coil springs, the front disc rotors, the bleeder master cylinder, A/C lines, radiator, clutch fan, 1101015 80 amp alternator, unitized distributor, etc... All the things I am hunting down and getting ready to reinstall once I get it back. (except for the 1101015 alternator and 1112133 unitized distributor which I haven't found yet).

[njsteve]

After a whole lotta research I was able to locate some Canadian documentation and pricing. Canadian window stickers are the rarest pieces of paper in the universe. They were completely different than the US counterpart. The form is different, the prices were higher and most dealers removed them from the cars beofre the sales since there was no Monroney Law in Canada like there was in the US.

Here is an example of a 1972 Corvette window sticker that was photographed along with a bunch of Corvettes at a Canadian dealer lot in 1972: