Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Display Modes |
|
#12
08-14-2011, 07:46 PM
|
|||
|
|||
Re: COPO Chevelle start/run problems
When troubleshooting a no run condition , I always start with a test light at the coil + terminal. With the ignition in RUN position there should be 12 Volts at the + terminal . If no voltage there go to the 12 ga purple wire on the Ign switch and test . If you have power there ,find the open between the two places you just tested . If no power at the switch ,adjust the switch first ,if still no power replace the switch.
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode